Popular Articles
Surfaces to Print On
This document serves as an informational guide on how to print on various surfaces. This list will be updated periodically as we gather more data. If your experience differs with any surfaces listed, or if you’ve printed on one not listed and would ...
Adjusting the Printhead Offset
Calibrating the colors of your wall or floor printer may be necessary if your image is not lining up or the colors are not in the proper order. The following procedures are to be carried out to Calibrate the Colors Sprayed by your printer. Power on ...
Adjusting the Printhead Speed
The following instructions are to adjust the printhead speed. You may want to adjust the speed of the printhead when: Using an extended rail Printing on a surface that will require the printhead to make many adjustments (e.g. riveted metal) On uneven ...
Eliminating Banding in Your Prints
Banding (also known as striping) is the result of inconsistent laying or curing of ink in your print. The causes of banding are nearly always due to environmental factors. Since banding can be caused by a variety of things, we recommend identifying ...
How to Manually Syringe the Pump Box
https://www.dropbox.com/scl/fi/s816jl1ykboms8500ztm4/2.-How-to-Manually-Syringe-the-Pumpbox.mp4?rlkey=d7xkazla1aonla955vllvj903&st=yh8hxv4y&dl=0